Archives > Frisco Enterprise > News
Cigar Bar topic on council agenda Tuesday
By Jan Bellamy, Staff Writer
When the Frisco City Council meets tonight, staff again asks for direction in whether or not to prepare a proposed ordinance amendment to allow a cigar bar to open in a building in Frisco Square.
City Council convenes at 5:30 p.m. for their first Tuesday meeting of June. They are expected to adjourn into executive session for at least an hour before reconvening for the public portion of the meeting.
The staff report attached to the agenda at www.friscotexas.gov indicates staff has reviewed other jurisdictions for ordinances regulating cigar bars.
1. Specify a minimum percentage of gross revenue from tobacco products
(exclusive of cigarettes and vending machines) Ten to 15 percent is recommended.
2. Specify a minimum area requirement for humidors of 100 n 200 square
feet. This will assist in freshening the air.
3. Specify a minimum area for the establishment with possible minimum
ceiling heights of 12 feet. Smoke rises, reasons staff, and this will keep the air at breathing level more pleasing.
4. Require separate ventilation and exhaust systems and minimum air
changes per hour. Current ordinance requires four air changes per hour.
5. Require annual registration of “Cigar Bars” with verification of minimum
revenue source requirements.
6. Consider stand-alone buildings or minimum separation requirements from
residential uses. According to discussions before council in May, the subject building in Frisco Square may meet staff’s recommendations.
7. Required interior finish and furnishing requirements to limit absorption of smoke odors. Staff’s review indicates fabrics hold odors while laminates, wood and leather either do not retain odors or do so less.
The following are comments from the readers.
In no way do they represent the view of Starlocalnews.com
In no way do they represent the view of Starlocalnews.com
You must register with a valid email to post comments.
Only your Member ID will be posted with the comments.
Only your Member ID will be posted with the comments.
Registered users sign in here:
Become a Registered User
- Return to: News «
- Home «
- Top of Page ^